📱 Device Compatibility
This IC is widely utilized across Samsung’s legacy mid-range and budget lineups, including:
- J Series: J200F (J2), J3300 (J3 Pro), J500H/F (J5), J700F/H (J7 2015), J610F (J6 Plus)
- A Series: A8000 / A800 (Galaxy A8)
- Tab Series: Galaxy Tab S2 8.0 (T715/T719)
🛠️ Common Symptoms of a Faulty SM5703A
When this IC degrades or fails due to water damage, voltage surges, or physical drops, you will typically observe:
- The phone completely failing to power on (dead boot caused by shorted power rails).
- The device refusing to pull current or register a connection when plugged into a USB wall charger.
- “Fake charging” behavior where the charging animation displays, but the battery percentage never increases.
- The device overheating rapidly near the top or middle section of the motherboard.
🔍 Replacement & Soldering Specifications
Because the SM5703A is a BGA (Ball Grid Array) microchip, replacing it requires professional micro-soldering tools and expertise:
- Heat Guidelines: Technicians typically use a hot air rework station set between 300°C to 350°C to safely desolder the broken chip and reflow the new replacement.
- Board Prep: High-intensity heat insulation kapton tape must shield surrounding SMD components to prevent accidental bridging. High-grade RMA flux should be applied generously to achieve proper solder ball alignment.
Reviews
There are no reviews yet.