Important Compatibility Notice
This component is built specifically for the M14 version of the Samsung Galaxy A20s (SM-A207 / 2019 / 6.5-inch display).
- Ensure your device utilizes the M14 specific logic board sub-architecture.
- It is not compatible with the alternative M12 version or other region-specific variants.
Technical Specifications
- Interface Type: USB Type-C 2.0 port integrated onto a sub-PBA board dock.
- Power Delivery Support: Rated for 15W Adaptive Fast Charging, ensuring stable power input without overheating.
- Integrated Sub-components: Features the primary Type-C port, lower microphone module, cellular antenna signal contacts, and the 3.5mm headphone/handsfree jack connector.
- Data Transfer Speed: Standard USB 2.0 speeds for stable media syncing and firmware flashing via computer.
- Part Number Reference: Frequently associated with Samsung internal catalog tracking, including OEM standard GH81-18341A.
Key Product Features
Comprehensive Restorative Function
Resolves multiple critical system faults simultaneously:
- Intermittent, slow, or completely failed battery charging cycles.
- Loose or physically broken USB Type-C internal pins.
- Lack of audio signal output or static through the headphone jack.
- Microphone malfunctions causing low or zero sound during phone calls.
High-Conductivity Architecture
Built with high-grade multi-layer flexible printed circuit (FPC) materials and solid-soldered logic pins. This guarantees optimal internal wiring connection, low resistance, and direct hardware fit without needing adjustments.
Plug-and-Play Installation Setup
Features pre-aligned screw holes and press-fit ribbon board connectors. It connects directly into the phone’s main ribbon assembly link, completely bypassing any complex soldering requirements during the physical swap.
Technical Diagnostic & Installation Guide
| Symptom Addressed | Repair Difficulty | Required Tools | Recommended Precaution |
|---|---|---|---|
| • Device unrecognized by PC • No response to charger cable • Faulty headphone audio output |
Moderate (Requires careful device disassembly) | • Precision screwdriver • Nylon spudger / opening pick • Heat gun or hair dryer |
Disconnect the battery connector link immediately after removing the back panel to prevent accidental short circuits. |
Reviews
There are no reviews yet.