🛠️ Key Technical Specifications
-
- Core Material: Pure, oxygen-free copper woven into a precise geometric braid pattern for optimal heat transfer.
- Chemical Properties: Pre-fluxed with a low-residue, anti-oxidation, and anti-corrosion formula that eliminates the immediate need for external flux.
- Total Length: Strictly 1.5 meters per spool across all variations.
- Available Widths: Standard width configurations include:
-
- 1.5mm (Model 1515) for delicate SMD components.
- 2.0mm (Model 2015) for general circuit board contacts.
- 2.5mm (Model 2515) for larger pads and high-density solder joints.
- 3.0mm for bulky connectors and heavy tin removal.
-
💡 Best Practices for Safe Use
- Minimize Heat Time: Do not keep your soldering iron tip pressed against the wick for more than 5 seconds at a time to prevent delaminating the PCB trace pads.
- Avoid Excessive Force: Let the thermal conductivity draw the solder up naturally; dragging or grinding the iron tip into the braid will scratch or ruin the delicate pad pathways.
- Prevent Burn Hazards: Hold only the plastic outer casing or the integrated grip during use. The bare copper wire gets hot enough instantly to cause severe finger burns.
- Snip Used Braid: Always cut off the rigid, solder-saturated piece after each cleaning step before attempting to desolder another joint
Reviews
There are no reviews yet.